Product Description

264x176, 2.7inch E-Ink display HAT for Raspberry Pi, three-color, SPI interface

This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.

Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

1、No backlight, keeps displaying last content for a long time even when power down

2、Ultra low power consumption, basically power is only required for refreshing

3、Compatible with Raspberry Pi 2B/3B/Zero/Zero W

4、Onboard 4x Keys

5、SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.

6、Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)


Specifications

1、Operating voltage: 3.3V

2、Interface: 3-wire SPI, 4-wire SPI

3、Outline dimension: 85mm × 56mm

4、Display size: 57.288mm × 38.192mm

5、Dot pitch: 0.217 × 0.217

6、Resolution: 264 × 176

7、Display color: red, black, white

8、Grey level: 2

9、Full refresh time: 15s

10、Refresh power: 26.4mW(typ.)

11、Standby power: <0.017mW

12、Viewing angle: >170°


Interface

SYMBOL

DESCRIPTION

VCC

3.3V

GND

Ground

DIN

SPI MOSI pin

CLK

SPI SCK pin

CS

SPI chip selection,low active

DC

Data/Command selection (high for data, low for command)

RST

External reset, low active

BUSY

Busy status output, low active



Photos


Development Resources

Wiki : www.seednew.com/wiki/2.7inch_e-Paper_HAT_(B)

PACKAGE CONTENT

Weight: 0.036 kg

1、2.7inch e-Paper HAT (B) x 1

2、Pi screws pack (2pcs) x2

3、PH2.0 20cm 8Pin x1




Write a review

Note: HTML is not translated!
    Bad           Good

2.7" e-Paper HAT (B)

  • Brands Seednew
  • Product Code: 2.7inch e-Paper HAT (B)
  • SKU: 2.7inch-e-Paper-HAT-B
  • Availability: In Stock
  • $20.99


  • 20 or more $15.99
  • 100 or more $13.99
  • 500 or more $12.99